Most CPAP machines need a 300–500Wh power station for one night with the humidifier off, and roughly double that with it on. The calculator below is set up for a CPAP plus phone charging for two nights; change anything to match your machine.
How much battery does a CPAP need per night?
Based on 8 hours of sleep per night and a typical machine. Your CPAP's pressure setting and your humidifier setting change these numbers, so treat them as a starting point.
CPAP setup
Plugged into
1 night
2 nights
3 nights
Humidifier off (~40W)
AC outlet
410 Wh
810 Wh
1,220 Wh
Humidifier off (~40W)
12V DC cord
380 Wh
750 Wh
1,130 Wh
Humidifier + heated tube on (~90W)
AC outlet
910 Wh
1,820 Wh
2,730 Wh
Humidifier + heated tube on (~90W)
12V DC cord
850 Wh
1,690 Wh
2,530 Wh
Battery sizes include the ~10% of rated capacity that isn't usable, plus inverter losses for AC.
Three ways to make the battery last longer
Turn off the humidifier and heated tube. They often use more power than the CPAP itself, so this is the single biggest saving.
Use a 12V DC cord instead of the AC outlet. It skips the power station's inverter, which wastes about a tenth of the energy. Your CPAP's manufacturer or supplier can tell you which cord fits your machine.
Measure your own machine. A plug-in watt meter shows your real draw at your pressure setting. Put that number into the calculator below instead of our typical figure.
–
Your results
Daily energy use395 Whabout 16W on average
Battery size needed878 Whfor 2 days without recharging
Inverter (AC output)100 Wsurge up to 40W
Solar to recharge daily150 Wwith 4 sun hours
Power stations that fit
Best fit
Anker SOLIX C1000 Gen 2
1,024Wh battery
1,600W output (2,000W surge)
600W max solar input (12–60V)
11.3 kg / 25 lb
Runs your list for about 2.3 days
☀ Pair with 2 × Jackery SolarSaga 100W
(200W):
about 600Wh a day —
enough to cover your daily use. Wiring: all 2 in series (about 49V per string).
CPAP: running without the humidifier and heated tube cuts power use by more than half. A DC adapter for your machine avoids inverter losses.
Watts on this page are typical figures. For the most accurate result, check the label on your device (or use a plug-in watt meter) and edit the numbers.
CPAP power questions
How long will a power station run my CPAP?
Take the power station's capacity in Wh, multiply by 0.9 (the usable share), then divide by your CPAP's watts plus about 12% for the AC inverter. A 500Wh unit running a 40W CPAP lasts about 450 ÷ 45 ≈ 10 hours, which is one full night. With the humidifier on (around 90W) the same unit lasts only about 4–5 hours.
Should I turn off the CPAP humidifier when camping?
If you can sleep comfortably without it, yes. The humidifier and heated tube are usually the biggest power draw, often more than the blower itself, so turning them off can more than double how long your battery lasts. If you need humidity, a lower humidifier setting still saves a lot.
Is it better to plug a CPAP into the AC outlet or the 12V socket?
The 12V (DC) socket wastes less energy because the power station doesn't have to convert battery power to 120V AC. Many CPAP makers sell a DC power cord or converter for their machines. Check with your CPAP's manufacturer or equipment supplier for the right one for your model.
Does my CPAP need a pure sine wave power station?
Yes, CPAP makers generally recommend pure sine wave AC power. The major portable power station brands use pure sine wave inverters, but check the spec sheet if you're buying a cheaper or older unit.
My CPAP power brick says 90W. Is that what it uses?
No, that's the most the power supply can deliver, not what your machine typically draws. Most CPAPs use well under that rating with the humidifier off. A plug-in watt meter will tell you your machine's real usage at your settings.
Medical note: if you rely on your CPAP, keep a backup plan for power outages and ask your equipment supplier which power sources your machine supports. Figures on this page are estimates.